Table of Contents
Advertisement
Install and Remove SFP Modules
Warning
Warning
Install and Remove SFP Modules
Before you remove or install an SFP or SFP+ module, read the installation information in this section.
Caution
Warning
Warning
Caution
Hardware Installation Guide for Cisco 8011-2X2XP4L PLE Service Endpoint Router
46
Statement 1089 Instructed and Skilled Person Definitions
An instructed person is someone who has been instructed and trained by a skilled person and takes the necessary
precautions when working with equipment.
A skilled person or qualified personnel is someone who has training or experience in the equipment technology
and understands potential hazards when working with equipment.
There are no serviceable parts inside. To avoid risk of electric shock, do not open.
Statement 1090 Installation by Skilled Person
Only a skilled person should be allowed to install, replace, or service this equipment. See statement 1089 for
the definition of a skilled person.
There are no serviceable parts inside. To avoid risk of electric shock, do not open.
Protect all the unused ports by inserting clean dust covers or dust caps into them.
Statement 1055 Class 1/1M Laser
Invisible laser radiation is present. Do not expose to users of telescopic optics. This applies to Class 1/1M
laser products.
Statement 1056 Unterminated Fiber Cable
Invisible laser radiation may be emitted from the end of the unterminated fiber cable or connector. Do not
view directly with optical instruments. Viewing the laser output with certain optical instruments, for example,
eye loupes, magnifiers, and microscopes, within a distance of 100 mm, may pose an eye hazard.
Protect the line card by inserting a clean SFP/SFP+ module cage cover (shown in the following figure) into
the optical module cage when there is no SFP or SFP+ module installed. The SFP/SFP+ module cage cover
is not a standard part of the accessories kit.
Install the Device
Advertisement
Table of Contents
