Installing The Cable Management Arm - Cisco IPS 7.1 Installation Manual

Installing the Rail System Kit
Step 3 To completely remove the IPS 4270-20 from the rack, disconnect the cables from the back of the
IPS 4270-20, push the release tab in the middle of the slide assembly forward, and pull the IPS 4270-20
from the rack.
1
2
3
4
5
6
7
8

Installing the Cable Management Arm

To hinge the cable management arm on the back right-hand side of the rack, see
Note
Management Arm, page
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
5-28
Cis co IPS
427 0 SER
IES
Int rus ion
Pre ven tio
n Sen sor
5-32.
Chapter 5 Installing the IPS 4270-20
Converting the Cable
OL-24002-01