Monitoring Configuration - NEC N8800-096F User Manual

Express5800 series

Hide thumbs Also See for N8800-096F:

Table of Contents

Monitoring Configuration

Select "monitoring Configuration" on the Server menu and press Enter to display the following

Boot Monitoring

Option ROM Scan

Monitoring Time-out

Monitoring Time-out

[10 minutes]

Select whether or not to enable the FRB-2 timer.

Select whether or not to enable the timer for boot

monitoring at startup. If you are starting up from an OS

with no NEC ESMPRO Agent installed, disable this

option. If you use Disaster Recovery Option for

ARCServe, select [Disabled].

Select whether or not to enable the function to monitor

the option ROM scan.

Set the timeout of the option ROM scan. This option is

displayed when the Option ROM Scan menu is set to

[Enabled] (unit: minute).

Set whether or not to enable the POST monitoring

function during boot pause.

Set the time for POST monitoring during boot pause.

This option is displayed when the POST Pause

Monitoring menu is set to [Enabled] (unit: minute).

System Configuration 4-25

]: Factory-set