Optional Cutter Module - Toshiba BA420T Series Owner's Manual

3. MAINTENANCE

3.1.3 Optional Cutter Module

NOTE:
To open and close the Front
Cover, first open the Top
Cover.
If it is difficult to open the
Front Cover, hold the cover
handle at the bottom.
WARNING!
As the cutter blade is sharp,
care should be taken not to
injure yourself when cleaning.
1. Open the Front Cover. (*Note)
2. Loosen the Set Screw of the Cutter Module to open it.
3. Remove jammed media, if any.
Cutter Module
Cutter Module
4. Clean the inside of the Cutter Blade with a cotton swab moistened
with absolute ethyl alcohol. The cutter blade moves up and down
when the Cutter Motor Shaft is rotated manually.
Inside of the Cutter Blade
5. In the same way, clean the outside of the Cutter Blade.
E3- 3
ENGLISH VERSION
Cutter Motor Shaft
Outside of the Cutter
Blade
3.1 Cleaning
Set Screw