On-Line Mode Functions - Toshiba B-EV4 Series Manual

4.2 ONLINE MODE FUNCTIONS
The online mode provides the following functions for issuing labels.
(1) Issuing labels (by external equipment interface commands)
(2) Paper feed (by the [FEED] key)
(3) Pause (by pressing the [FEED] key while printing)
(4) Error indication
(5) Sensor selection
Transmissive sensor, reflective sensor and non-sensor mode are available.
To select the sensor for the media, turn on power to let printer online mode. Open printer cover,
the LED will be turned off. Press FEED key for over 5 seconds, and then release the button, then
printer will enter sensor selection mode.
In sensor selection mode, if LED is changed to green color and press FEED key again, then
reflective sensor is selected.
If LED is changed to orange color and press FEED key again, then non-sensor is selected.
If LED is changed to red color and press FEED key again, then transmissive sensor is selected.
(6) While the printer is in an error state, the [FEED] key functions as restart key.
- 11 -