Print Mode; Batch Mode; Strip Mode (Option) - Toshiba BV410D-GS02-QM-S Owner's Manual

12. Print mode

There are four print modes available for this printer.
 Batch mode
In the batch mode, the media is continuously printed and fed until the number of prints specified in the issue
command has been printed.
To separate the printed media from the printer in the batch mode, tear the media off at the media outlet with your
hands. (When the optional peel-off module is installed, tear the media off outside of the strip plate.) If you have torn
the media off at the print head mistakenly, be sure to feed one label (10 mm or more) by pressing the [FEED] button
prior to the next print. Otherwise, this may cause a media jam.
 Strip mode (Option)
When the optional peel-off module is installed and printing is performed in the strip mode, labels are automatically
removed from the backing paper as each label is printed.
When you print labels without removing them from the backing paper, it is not necessary to pass the media through
the media slot.
Place the media.
1
For details, refer to  P.26 "10. Loading the Media".
Open the peel-off module [1].
2
Remove enough labels [2] from the leading edge of the media so as only the backing paper
3
portion can be created.
[ 1 ]
[ 2 ]
12. Print mode 31