Rebooting A Line Card Port; Advanced Settings - 3Com SuperStack 3 NBX Administrator's Manual

218 C 3: D
HAPTER EVICE
Rebooting a
Line Card Port

Advanced Settings

C
ONFIGURATION
To reboot a line card port:
1 In the NBX NetSet - Main Menu window, click Device Configuration . The
Device Configuration dialog box appears (Figure 49).
2 Click the Line Card Ports tab. The Line Card Ports dialog box appears
(Figure 72).
3 From the list, select the port that you want to reboot.
4 Click Status. The Device Status dialog box appears (Figure 75).
5 Click Reset Device.
6 Click OK .
CAUTION: On the 3C10117 Analog Line Card, you can reboot individual
ports without affecting the other ports. However, if you reboot a port on
the 3C10117C Analog Line Card, all four ports on the card are rebooted.
Active telephone calls on any of these ports are disrupted.
The Advanced Settings button enables you to set the audio gain and
timing controls on each port of an Analog Line Card.
To set these parameters:
1 In the NBX NetSet - Main Menu window, click Device Configuration.
2 Click the Line Card Ports tab.
3 Select one of the items from the list and click Advanced Settings. The
Advanced Settings dialog box (Figure 80) appears.
If you change any of the values in the Advanced Settings dialog box, the
settings that you change persist if you later upgrade the NBX system
software or change the regional software.
Default Values
To reset all parameters to the default values, click the Reset button.
Table 35 describes each field in the dialog box.
Table 35 Analog Line Card Ports - Advanced Settings Parameters
Field
MAC Address
Purpose
The factory-assigned MAC address for the Analog Line
Card port.