Configuring And Managing Bri-St Digital Line Cards - 3Com SuperStack 3 NBX Administrator's Manual

Configuring and
Managing BRI-ST
Digital Line Cards
Table 41 Analog Terminal Adapter - Advanced Settings Parameters (continued)
Field
Reset
These sections describe how to add and configure a BRI-ST Digital Line
Card to handle a BRI line with four BRI spans using the ST interface. In
this chapter, and in the NBX NetSet utility, Digital Line Cards are referred
to as cards and boards.
This section covers these topics:
Adding an ISDN BRI-ST Digital Line Card
■
Configuring the ISDN BRI-ST Digital Line Card
■
BRI-ST Card Status Lights
■
Modifying a BRI-ST Card
■
Adding or Modifying a BRI Group
■
Modifying BRI Card Channels
■
Modifying IP Settings for a BRI Card
■
Removing a BRI Digital Line Card
■
Each BRI-ST card (
3C10164-S/T
(ST interface only).

Configuring and Managing BRI-ST Digital Line Cards

Purpose
Click the Reset button to set all parameters to the
default values.
) supports the Basic Rate Interface protocol
239