Support Of At&T's 4Ess Switch Protocol - 3Com SuperStack 3 NBX Administrator's Manual

308 C 3: D
HAPTER EVICE
Support of AT&T's
4ESS Switch Protocol
C
ONFIGURATION
You can select AT&T's 4ESS switch protocol when you configure a T1
Digital Line Card for PRI (Primary Rate Interface) operation. If you select
the 4ESS protocol, you can optionally use Call By Call Service
Configuration which enables you to select one of three access services:
Long Distance — The default service if the customer selects the 4ESS
■
protocol, but purchases no other services. Long Distance can be used
with SDN but not with MEGACOM.
MEGACOM — A high-volume outward calling service. MEGACOM
■
can be the default setting.
SDN (Software Defined Network) — A premises-to-premises service
■
with voice and voice-grade data transport, plus a number of
customer-controllable call management and call monitoring features
(for example, Virtual Private Networking). You cannot configure SDN
as the default setting but you can configure the NBX system dial plan
to use SDN.
Selecting the 4ESS Protocol
To select the 4ESS protocol:
1 In the NBX NetSet Main Menu window, click Device Configuration.
2 Click the Digital Line Cards tab.
3 From the Select Device Type pull-down list, select ISDN PRI Span List.
4 Click Apply. See Figure 128.