E1 Card Status Lights; Modifying An E1 Card - 3Com SuperStack 3 NBX Administrator's Manual

266 C 3: D
HAPTER EVICE

E1 Card Status Lights

Modifying an E1 Card

C
ONFIGURATION
The E1 card contains these status lights:
CF — Carrier Fail (when lit, indicates either a red alarm or blue alarm)
■
RA — Remote Alarm (yellow alarm)
■
LB — Loopback
■
Nominal — E1 card is framed
■
These sections tell you how to modify a E1 card that is already installed in
the system:
Modifying the E1 Card Name
■
Modifying an E1 Span
■
Configuring Partial E1 Lines
■
Modifying Audio Controls
■
Modifying the E1 Card Name
You can change the name of an E1 Digital Line Card at any time. The
name you pick helps you identify the E1 card in device lists.
To modify an E1 card name:
1 In the NBX NetSet - Main Menu window, click Device Configuration
(Figure 97).
Figure 97 NBX NetSet - Main Menu Window