Setting The Input/Output Channels For Two Channels Of Digital Audio Signals - Sony PCM-3348HR Quick Reference

4. Setting the Input/Output Channels for
Two Channels of Digital Audio Signals
References:
•
RM-3324 Operation Manual, "8-1 Setting the Input/Output Channels for Two
Channels of Digital Audio Signals"
•
RM-3324S Operation Manual, "5-1 Setting the Input/Output Channels for Two
Channels of Digital Audio Signals"
•
PCM-3348HR Operation Manual, "2-4-7 Setting the Input/Output Channels for
Two Channels of Digital Audio Signals"
Note
Using this function on the PCM-3324S requires the DABK-3326 Digital I/O Board
or DABK-3327 Digital I/O Board to be installed.
The figure shows the PCM-3348HR.
1
Press the 2CH DIO SET UP button.
The LOCATE TIME display indications are as shown in the following table.
Indication
Slot number
Connector number
Channel number

Setting the Input/Output Channels for Two Channels of Digital Audio Signals

LOCATE TIME
H
Slot No. Connector No.
d1 1 / 2
d2 3 / 4
d3 5 / 6
d4 7 / 8
DIGITAL I/O
DIGITAL AUDIO CHANNEL LINE INPUT
Board slot position
Input/output channel identifier (A/B).
For example, channel B for slot d3 is number 6.
Blank Board not installed
– – Board is installed, but no channel is allocated.
Number Allocated digital audio channel number
MIN SEC FRAME mSEC
Channel No.
REMOTE CONTROL
ANALOG TIME CODE SECTOR SECTOR
ADDRESS SYNC
Meaning
WORD SYNC
(Continued)
5