Connections And Settings; Connections For Using Xdcam Browser Or A Nonlinear Editor That Is Not A Sony Product; Connections For Cut Editing - Sony XDS-1000 Operation Manual

Connections and
Settings
Note
Production of some of the peripherals and related devices
described in this chapter may have been discontinued.
For advice about choosing devices, contact your Sony
sales representative.
Connections for using XDCAM
Browser or a nonlinear editor that is
not a Sony product
When using XDCAM Browser, you can have a remote
access to this unit from a network connected computer.
You can also access to this unit from a nonlinear editor that
is not a Sony product via FTP/CIFS, and use this unit as a
material server.
For an overview and installation of the XDCAM Browser,
access the Sony website closest to your area.
When using the
The following shows connection examples.
Note
The XDS-1000 IP address and other network-related
settings are required for connections.

Connections for cut editing

The following figure shows a cut editing system
comprising this unit as a player.
When using an
BVE-700/700A
The following figure shows a cut editing system
comprising this unit as a player, an HDW-M2000/M2000P
unit as a recorder, and a BVE-700/700A as an editing
control unit.
32

Connections and Settings

(network) connector
editing control unit
For details of the network-related settings, see "To change
network settings" (page 92).
Connecting this unit directly to a laptop computer
This unit
To (network)
connector
Network cable (not supplied)
Connecting three of this unit to a laptop
computer via a LAN
This unit
When making the connections, also refer to the manuals
provided with the equipment to be connected.
Laptop computer
Laptop computer
Network cable
(not supplied)
To (network) connector