Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual page 544

unlockmaintenance(8)
EXIT STATUS
SEE ALSO
520 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
Unlocks the maintenance lock status. Automatically answers "y" to all
EXAMPLE 2
prompts.
unlockmaintenance -y
XSCF>
This command unlocks the maintenance lock which prevents the multiple
execution of maintenance commands.
*Never* use this command, except when the lock state remains by some reason.
Careless execution of this command causes serious situation because it
interrupts the running command and XSCF might not be able to recognize the
parts.
Continue? [y|n] :y
Unlocks the maintenance lock status. Suppresses prompts, and automatically
EXAMPLE 3
answers "y" to all prompts.
unlockmaintenance -q -y
XSCF>
XSCF>
The following exit values are returned:
Successful completion.
0
An error occurred.
>0
addfru(8), deletefru(8), replacefru(8)