Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual page 344

showad(8)
OPERANDS
EXAMPLES
320 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised November 2009
Appends to end of output the number of records in the log.
-C
Specifies the last record number to display, where
-E
end_record_number can be any record number in the log. Use -C
to obtain the number of records in the log.
Displays text by page, like the more(1) command does.
-M
Specifies the first record to display, where start_record_number
-S
can be any record number in the log. Use -C to obtain the
number of records in the log.
The following operands are supported:
cert
log
group administrator
group operator
group custom
userdomain
dnslocatorquery
defaultrole
server
Displays the current state of the active directory.
EXAMPLE 1
showad
XSCF>
dnslocatormode: disabled
expsearchmode: disabled
state: enabled
strictcertmode: disabled
timeout: 4
Displays certificate information for the Primary server.
EXAMPLE 2
showad cert
XSCF>
Primary Server:
certstatus = certificate present
issuer = C=US, ST=California, L=San Diego, O=aCompany,
OU=System Group, CN=John User serial number = 0 (00000000)
subject = C=US, ST=California, L=San Diego, O=aCompany,
OU=System Group, CN=John User serial number = 0 (00000000)
Display current server certificates.
Display diagnostic messages.
Display current group configurations.
Display current group configurations.
Display current group configurations.
Display current userdomain settings.
Display current DNS locator query configuration.
Display current defaultrole setting.
Display current Active Directory server settings.