Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual page 272

setntp(8)
248 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised February 2010
Displays usage statement. When used with other options or
-h
operands, an error occurs.
-i stratum_no Specifies the stratum value. This option is used together with the
"-c stratum". An integer from 1 to 15 can be specified. If the
stratum value not specified, it is 5.
-m type=value Sets the preferred server or the local clock of XSCF. You can
specify either of the following for type:
prefer
localaddr
When prefer is specified for type, either of the following can be
specified for value:
on
off
When localaddr is specified for type, specify the least
significant byte of the clock address of the local clock 127.127.1.x
for value. A numeric from 0 to 3 can be specified. The default is
0, and the clock address of the local clock at this time is
127.127.1.0.
Specifies whether priority should be given to
the NTP server at the top of the registered
list at the time of synchronization.
Sets the local clock of XSCF.
That server is the first choice and alternatives
servers are given preference in order of
increasing stratum value, from lowest to the
highest. The default value is on.
The same preferences are given with no
priority for the server at the top of the list.