NAME
showsunmc - show setup information and status of Sun Management Center agent
SYNOPSIS
showsunmc [isenabled]
showsunmc [-h]
DESCRIPTION
This command is used to show the setup information and current status of the Sun
Management Center agent. When used with the isenabled option, the
showsunmc command output displays on the agent status: 1 if the agent is enabled,
0 if the agent is disabled.
OPTIONS
The following options are supported.
isenabled
-h
You must have platadm, platop, or fieldeng privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
OPERANDS
There are no operands for this command.
EXAMPLES
EXAMPLE 1
Displays only the agent status. The value 1 indicates the agent is
enabled, 0 indicates the agent is disabled.
Displays usage statement.
When used with other options or operands, an error occurs.
Show the Status of the Agent: Not Set Up or Enabled
showsunmc
XSCF>
Agent Status:
Setup Status:
SunMC Server:
Security Seed:
SNMPv1 Community String:
Agent Port:
Host Trap Port:
Host Event Port:
SNMP Agent Port:
Domain Agent Ports:
Disabled
Not set up
unknown
maplesyr
public
1161
162
163
161
1161
System Administration
showsunmc(8)
489