Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual page 213

Domain CPU Value of CPU
configuration Mode
SPARC64 VII
compatible
SPARC64 VII/VI auto or
compatible
SPARC64 VI auto or
compatible
For details of the CPU operational mode and the DR operation, see the DR User's
Guide.
To add the XSB other than those above, you need to perform the domain
■
reconfiguration accompanied by the domain power off/on or reboot.
When the operational mode of CPU has been automatically determined, if a
■
situation as described below occurred, the CPU operational mode changes at the
domain restart, from the SPARC64 VI compatible mode to the SPARC64 VII
enhanced mode. In the SPARC64 VII enhanced mode, an XSB mounted with the
SPARC64 VI processors cannot be added by DR operation.
When the SPARC64 VII and VI processors are mixed, after the restart due to
■
the SPARC64 VI processor failure, there is no SPARC64 VI processor on a
domain.
When the SPARC64 VI processors mounted, or planned to be mounted on the
domain, set the operational mode of CPU to the SPARC64 VI compatible mode.
To check the mode of CPUs which currently set to the domain, execute the
■
prtdiag(1M) command on Solaris OS. For the prtdiag(1M) command, see the
manual page of Solaris OS.
If the Mode switch of the operator panel is set to Service, the settings of the
■
modes of operation for the specified domain have the following values,
regardless of the settings of the setdomainmode(8) command:
OpenBoot PROM diagnostic level (Diagnostic Level), operational mode of
■
CPU (CPU Mode): operates as the setdomainmode(8) command setting
Host watchdog and suppress break signal reception (Secure Mode), auto
■
boot function (Autoboot): off
When the OpenBoot PROM environmental variable 'auto-boot?' has been set
■
to false, the auto boot function is disabled.
The diagnostics level of OpenBoot PROM is applied to the diag level of the
■
addboard(8) command and moveboard(8) command.
Current CPU operational mode CPU configuration of a system
SPARC64 VI compatible
mode
SPARC64 VI compatible
mode
SPARC64 VI compatible
mode
setdomainmode(8)
board which can be added by
DR operation
Any CPU configuration
Any CPU configuration
Any CPU configuration
System Administration 189