Showshutdowndelay - Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual

NAME showshutdowndelay - display the shutdown wait time at power interruption of the
uninterruptible power supply (UPS)
SYNOPSIS

showshutdowndelay

showshutdowndelay -h
DESCRIPTION The showshutdowndelay(8) command displays the wait time before the start of
system shutdown for when power interruption occurs in a system connected to the
UPS.
The time set by the setshutdowndelay(8) command is displayed. The default
time set is 10 seconds.
You must have one of the following privileges to run this command:
Privileges
platadm, platop, domainadm, domainmgr, domainop, fieldeng
Refer to setprivileges(8) for more information.
The following options are supported:
OPTIONS
-h
EXAMPLES
EXAMPLE 1
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO setshutdowndelay(8)
Displays usage statement.
Displays the wait time before the start of shutdown.
showshutdowndelay
XSCF>
UPS shutdown wait time : 600 second(s)
Successful completion.
An error occurred.
showshutdowndelay(8)
System Administration 471