Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual page 189

-g enable|disable
Sets the global user audit record generation policy.
When set to disable, no audit record which can be attributed to any user
account is generated. These settings can be overridden on an individual user
basis using the -a option.
-h
Displays usage statement.
When used with other options or operands, an error occurs.
-m mailaddr
Sets the mail address to which email is sent when the local audit storage space
usage reaches a threshold (see option -t). Email addresses must be a valid
email address of the form user@company.com. Specifying none for mailaddr
turns off email notification.
-p suspend|count
Sets the policy to follow when the audit trail becomes full. The following are
valid values:
suspend
count
-t percents
Sets thresholds at which to issue a warning about local audit storage usage.
percents is a comma-separated list of percentages of available space used. At
most four values may be set. For example, values of 50, 75, 80, 90 would
cause warnings to be issued when 50%, 75%, 80% and 90% respectively, of the
available storage for audit records is consumed. The default value is 80%.
Warnings are issued as a message to the console and optionally to an
administrator using email. See -m mailaddr.
All processes which try to write to audit records will be
suspended until either space becomes available and
records can be written, or the policy is changed to count.
New audit records are dropped and a count is kept of
how many records are dropped.
setaudit(8)
System Administration 165