Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual page 238

sethttps(8)
EXAMPLES
214 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2010
The size of the file to be generated by sethttps(8) grows with total character
■
count typed in the operands of configuring the self-certification authority and
creating a self-signed web server certificate, and creating a CSR. If the file to be
generated is too large for XSCF, the command fails with an error. If you see this
error, reduce the number of characters in the operands and execute the
sethttps(8) command again.
When you use sethttps(8) command to disable the HTTPS service (sethttps
■
-c disable), the HTTPS service is disabled immediately. At this time, any
opened HTTPS sessions are terminated.
For all other settings using the sethttps(8) command, you must reboot the
XSCF using the rebootxscf(8) command for the changes to take effect.
Using the showhttps(8) command you can check the current settings in relation
■
to the HTTPS service.
Starts the HTTPS service.
EXAMPLE 1
sethttps -c enable
XSCF>
y
Continue? [y|n] :
Please reset the XSCF by rebootxscf to apply the https settings.
Stops the HTTPS service.
EXAMPLE 2
sethttps -c disable
XSCF>
Creates a CSR with the following settings: country: JP, state|province: Kanaga-
EXAMPLE 3
wa, locality: Kawasaki, organization: Example, organizationalunit: develop-
ment, common: scf-host, e-mail: abc@example.com
sethttps -c gencsr JP Kanagawa Kawasaki Example development
XSCF>
\ scf-host abc@example.com
Creates the self-certification authority with the following settings, and creates
EXAMPLE 4
a self-signed web server certificate:country: JP, state|province: Kanagawa, lo-
cality: Kawasaki, organization: Example, organizationalunit: development, com-
mon: scf-host, e-mail: abc@example.com
sethttps -c selfsign JP Kanagawa Kawasaki Example development
XSCF>
scf-host abc@example.com
CA key and CA cert already exist. Do you still wish to update? [y|n] :
Enter passphrase:
Verifying - Enter passphrase:
y