Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual page 520

showtimezone(8)
EXAMPLES
EXIT STATUS
SEE ALSO
496 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
dst dst name
The settimezone(8) command sets the time zone of the XSCF.
■
Displays the time zone.
EXAMPLE 1
showtimezone -c tz
XSCF>
Asia/Tokyo
Displays the Daylight Saving Time information as follows: the abbreviation
EXAMPLE 2
of time zone is JST, the offset from GMT is +9, the name of Daylight Saving
Time is JDT, Daylight Saving Time is 1 hour ahead, and the time period is
from the last Sunday of March 2:00 to the last Sunday of October 2:00.
showtimezone -c dst -m custom
XSCF>
JST-9JDT,M3.5.0,M10.5.0
Displays the Daylight Saving Time information as follows: the abbreviation
EXAMPLE 3
of time zone is JST, the offset from GMT is +9, the name of Daylight Saving
Time is JDT, Daylight Saving Time is 1 hour ahead, and the time period is
from the first Sunday of April 0:00 to the first Sunday of September 0:00.
showtimezone -c dst
XSCF>
JST-9JDT-10,M4.1.0/00:00:00,M9.1.0/00:00:00
Displays the Daylight Saving Time information that has been set in the cur-
EXAMPLE 4
rent time zone by default.
showtimezone -c dst -m standard
XSCF>
From: Sun Mar 9 03:00:00 2008 PDT
To: Sun Nov 2 01:59:59 2008 PDT
The following exit values are returned:
Successful completion.
0
An error occurred.
>0
setdate(8), settimezone(8), showdate(8)