Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual page 174

setad(8)
OPTIONS
OPERANDS
150 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised February 2010
The following options are supported:
Displays usage statement. When used with other options or
-h
operands, an error occurs.
-i n Sets an index marker, value 1 - 5.
Automatically answers "n" (no) to all prompts.
-n
Specifies the proxy server to be used for transfers. The default
-p
transfer type is http, unless modified using the -t proxy_type
option. The value for proxy must be in the format
servername:port. See
Suppresses all messages to stdout, including prompts.
-q
Use with the -p option to specify proxy type as http, socks4,
-t
or socks5. The default is http.
Specifies the user name when logging in to a remote ftp or http
-u
server that requires authentication. Prompts for a password. See
EXAMPLE 9
Automatically answers "y" (yes) to all prompts.
-y
The following operands are supported:
enable|disable
loadcert
rmcert
EXAMPLE 8
.
When used with no other operands, enable or disable the
Active Directory feature.
loadcert console prompts for certificate information
to be entered at the console. Use this command to paste
certificate information copied from a file. Terminate input
with CTRL-D.
loadcert URI loads a certificate file for the Active
Directory server. Supported formats for URI are:
http://server[:port]/path/file
https://server[:port]/path/file
ftp://server[:port]/path/file
file:///media/usb_msd/path/file
Delete certificate file for the Active Directory server.
strictcertmode must be in the disabled state for a
certificate to be removed.
.