Setupplatform - Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual

NAME setupplatform - set up platform specific settings
SYNOPSIS setupplatform [-v]
setupplatform [-v] -p part [-p part]
setupplatform -h
DESCRIPTION The setupplatform(8) command sets up platform specific settings. The command
leads an administrator through Service Processor installation tasks.
By default, setupplatform command walks through each of the available
settings. Individual settings may be selected using the -p option.
You must have one of the following privileges to run this command:
Privileges
■
■
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
-h
-p part
-v
EXTENDED The available interfaces on the M3000/M4000/M5000 servers are xscf#0-lan#0,
DESCRIPTION xscf#0-lan#1, lan#0, lan#1. The available interfaces on the M8000/M9000 servers are
the same but they also include the xscf#0-if, xscf#1-lan#0, xscf#1-lan#1, and xscf#1-
if.
To use the -p user option: usradm
To use the -p network, -p altitude, -p timezone options: platadm
Displays usage statement. When used with other options or
operands, an error occurs.
Specifies the setting you want to do. One of the following can be
specified for part:
altitude
network
timezone
user
Specifies verbose output.
Configures the chassis altitude.
Configures the XSCF network, DSCP, DNS,
NTP, SSH, https, and SMTP.
Sets the time zone for the XSCF. The time
zone is chosen from a list of time zones.
Creates a new local XSCF user account with
platadm, platop, and useradm privileges.
Note that an XSCF user account user name
cannot match an LDAP user name, and an
XSCF user account (UID) number cannot
match an LDAP UID number.
System Administration

setupplatform(8)

313