Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual page 178

setad(8)
154 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised February 2010
-----END CERTIFICATE-----
CTRL-D
XSCF>
Configures user domain 2. <USERNAME> is a template that must be entered
EXAMPLE 6
exactly as shown. During authentication the user's login name replaces
<USERNAME>. userdomain can take the form of UPN or Distinguished
Name (DN).
setad userdomain -i 2
XSCF>
'<USERNAME>@yoshi.example.aCompany.com'
Loads a server certificate for Active Directory using the specified URI.
EXAMPLE 7
setad loadcert http://domain_2/UID_2333/testcert
XSCF>
Loads a server certificate for Active Directory using an http Proxy Server with
EXAMPLE 8
port 8080 .
setad loadcert -p webproxy.aCompany.com:8080
XSCF>
http://domain_2/UID_2333/testcert
Loads a server certificate for Active Directory using a username and pass-
EXAMPLE 9
word.
setad loadcert -u yoshi
XSCF>
http://domain_2/UID_2333/testcert
Removes the certificate for alternate server 3.
EXAMPLE 10
setad rmcert -i 3
XSCF>
Sets logging of high-severity diagnostic messages.
EXAMPLE 11
setad logdetail high
XSCF>
Clears diagnostic messages from the log file, answering Yes to all prompts.
EXAMPLE 12
setad log -y clear
XSCF>
Enables strictcertmode.
EXAMPLE 13
setad strictcertmode enable
XSCF>
Configures the dnslocatorquery configuration. service represents the DNS
EXAMPLE 14
query to be performed. The port ID is generally part of the record, but you can
override it by using the format <PORT:portnumber>. Also, named services
specific for the domain being authenticated can be specified by using the