NAME
showloginlockout - display the account lockout setting
SYNOPSIS
showloginlockout
showloginlockout -h
DESCRIPTION
The showloginlockout(8) command displays the amount of time, in minutes,
that a user is prevented from logging in after three failed attempts.
Privileges
You must have useradm privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS
The following option is supported:
-h
EXTENDED
A user is allowed three consecutive attempts to login. After the third failed attempt
DESCRIPTION
the system prevents further attempts for the amount of time determined by the
setloginlockout(8) command. showloginlockout displays that amount of
time in minutes.
After the set amount of time has elapsed, the user may try again.
EXAMPLES
EXAMPLE 1
EXIT STATUS
The following exit values are returned:
0
>0
SEE ALSO
setloginlockout(8)
Displays usage statement. When used with other options or
operands, an error occurs.
Display The Lockout time
showloginlockout
XSCF>
90 minutes
Successful completion.
An error occurred.
showloginlockout(8)
System Administration
423