Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual page 236

sethttps(8)
OPTIONS
OPERANDS
212 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2010
The following options are supported:
-c {enable|disable} Specify whether to enable the HTTPS service. One of the
-c gencsr
-c genserverkey
-c importca
-c selfsign
-h
-n
-q
-y
The following operands are supported:
common Specifies common names, such as the creator name and the host
name of a server, using up to 64 characters. If "-c selfsign" is
specified, the value with only spaces is not allowed.
country Specifies a country name with a two-letter code such as JP or US.
If "-c selfsign" is specified, the value with only spaces is not
allowed.
e-mail Specifies an E-mail address using up to 64 characters. If "-c
selfsign" is specified, do not specify the value with only
spaces.
locality Specifies a city name and so on using up to 64 characters.
following values can be specified. If none of them is
specified, an error occurs.
Starts the HTTPS service.
enable
Stops the HTTPS service.
disable
Creates a CSR.
Creates the private key of the web server.
Imports a web server certificate signed by the certification
authority to the XSCF.
Configures the self-certification authority. Also, this
operand creates a self-signing web server certificate.
Displays usage statement. When used with other options
or operands, an error occurs.
Automatically answers "n" (no) to all prompts.
Suppresses all messages to stdout, including prompts.
Automatically answers "y" (yes) to all prompts.