Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual page 14

Note – Once an XCP version newer than the XCP version supported by this manual is
released, only the manuals related to the new XCP version are subsequently updated.
You must therefore check the manuals for the latest XCP version in addition to those
related to the XCP version you are using.
Global Site
http://www.fujitsu.com/sparcenterprise/manual/
Japanese Site
http://primeserver.fujitsu.com/sparcenterprise/manual/
North American Site
https://download.computers.us.fujitsu.com/
This section includes:
"Audience" on page viii
■
"Notation of This Manual" on page viii
■
"SPARC Enterprise Mx000 Servers Documentation" on page x
■
"Glossary" on page xiv
■
"Abbreviated References to Other Documents" on page xv
■
"Models" on page xvi
■
"Prompt Notations" on page xvi
■
"Software License" on page xvii
■
"Fujitsu Welcomes Your Comments" on page xvii
■
Audience
This manual is intended for users, who administrate M3000/M4000/M5000/M8000/
M9000 servers (hereinafter referred to as XSCF user). The XSCF user is required to
have the following knowledge:
Oracle Solaris Operating System (Solaris OS) and UNIX commands
■
M3000/M4000/M5000/M8000/M9000 servers and basic knowledge of XSCF
■
Notation of This Manual
Here describes the notation used in this manual.
viii SPARC Enterprise Mx000 Servers XSCF Reference Manual • July 2010