Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual page 308

setsnmp(8)
EXAMPLES
EXIT STATUS
SEE ALSO
284 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
Setting Up System Information
EXAMPLE 1
setsnmp -l sandiego -c username@company.com -d ff1
XSCF>
Setting Up and SNMPv3 Trap Host With Password Options
EXAMPLE 2
setsnmp addv3traphost -u jsmith -n 0x### -r SHA -a xxxxxxxx
XSCF>
-e yyyyyyyy fiche
Setting Up and SNMPv3 Trap Host without Password Options
EXAMPLE 3
setsnmp addv3traphost -u bob -i -r SHA fiche
XSCF>
Authentication Password:
Encryption Password:
Starting the Agent
EXAMPLE 4
setsnmp enable SP_MIB
XSCF>
The following exit values are returned:
Successful completion.
0
An error occurred.
>0
setsunmc(8), showsnmp(8)