Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual page 246

setldapssl(8)
OPTIONS
OPERANDS
222 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised February 2010
The following options are supported:
Displays usage statement. When used with other options or
-h
operands, an error occurs.
-i n Sets an index marker, value 1 - 5.
Automatically answers "n" (no) to all prompts.
-n
Specifies the proxy server to be used for transfers. The default
-p
transfer type is http, unless modified using the -t proxy_type
option. The value for proxy must be in the format
servername:port. See
Suppresses all messages to stdout, including prompts.
-q
Use with the -p option to specify proxy type as http, socks4,
-t
or socks5. The default is http.
Specifies the user name when logging in to a remote ftp or http
-u
server that requires authentication. Prompts for a password. See
EXAMPLE 13
Automatically answers "y" (yes) to all prompts.
-y
The following operands are supported:
enable|disable
loadcert
rmcert
EXAMPLE 12
.
When used with no other operands, enable or disable
LDAP/SSL.
loadcert console prompts for certificate information
to be entered at the console. Use this command to paste
certificate information copied from a file. Terminate input
with CTRL-D.
loadcert URI loads a certificate file for the LDAP/SSL
server. Supported formats for URI are:
http://server[:port]/path/file
https://server[:port]/path/file
ftp://server[:port]/path/file
file:///media/usb_msd/path/file
Delete certificate for an LDAP/SSL server. strictcertmode
must be in the disabled state for a certificate to be
removed.
.