Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual page 210

setdomainmode(8)
OPTIONS
186 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
Host watchdog and suppress break signal reception, auto boot function, and
■
operational mode of CPU:
Can run this command for all domains.
platadm
Can run this command only for your managed domains.
domainadm
Refer to setprivileges(8) for more information.
The following options are supported:
-d domain_id Specifies the domain ID to be set. domain_id can be 0–23
depending on the system configuration.
Displays usage statement. When used with other options or
-h
operands, an error occurs.