Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual page 372
Xscf control package (xcp) 109x
Hide thumbs
Also See for SPARC ENTERPRISE M3000:
- Xscf reference manual (542 pages) ,
- Service manual (202 pages) ,
- Product notes (144 pages)
Table of Contents
Advertisement
showcodusage(8)
EXTENDED
DESCRIPTION
348
SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised July 2010
The showcodusage -p resource command displays the following COD usage
information for the system:
Identifies the type of COD resources available (processors).
Resource
Specifies the number of COD CPUs currently used in the
In Use
system.
Specifies the number of COD CPUs installed in the system.
Installed
Specifies the number of COD permits installed.
COD Permitted
Specifies one of the following COD attributes:
Status
OK
HEADROOM
Violation
The showcodusage -p domain command displays the following COD usage
information for each domain:
Domain/Resource Identifies COD resource (processor) for each domain. An
Unused processor is a COD CPU that has not yet been
assigned to a domain.
Specifies the number of COD CPUs currently used in the
In Use
domain.
Indicates that there are sufficient permits
for the COD CPUs in use. Also displays
the number of remaining COD resources
available and the number of any instant
access CPUs (headroom) available.
The number of instant access COD CPUs
in use.
Indicates a COD permit violation exists.
Displays the number of COD CPUs in use
that exceeds the number of COD permits
available. This situation can occur when
you force the deletion of a COD key from
the COD Hardware Activation database,
but the COD CPU associated with the key
is still in use.
Advertisement
Table of Contents
