Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual page 212

setdomainmode(8)
EXTENDED
DESCRIPTION
188 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
(continued) When cpumode is specified for function, one of the following can
be specified for mode:
Note – When the domain is in any status other than powered
off, it results in an error.
auto
■
■
■
compatible
Automatically answers "n" (no) to all prompts.
-n
Suppresses all messages to stdout, including prompts.
-q
Automatically answers "y" (yes) to all prompts.
-y
When the command is executed, a prompt to confirm execution of the command
■
with the specified options is displayed. Enter "y" to execute the command or "n"
to cancel the command.
The system board (XSB) which can be added by Dynamic Reconfiguration (DR)
■
is decided by the CPU operational mode currently set to the domain, which is as
follows:
Domain CPU Value of CPU
configuration Mode
SPARC64 VII
auto
Automatically determines the operational mode of CPU at domain
startup. Depending on the CPU configuration on the domain, any
of the following CPU operational mode is set:
Consists only of SPARC64 VII processors: SPARC64 VII
enhanced mode
SPARC64 VII and VI processors mixed: SPARC64 VI
compatible mode
Consists only of SPARC64 VI processors: SPARC64 VI
compatible mode
Regardless of the CPUs mounted, sets the operational mode of
CPU to the SPARC64 VI compatible mode.
Current CPU operational mode CPU configuration of a system
SPARC64 VII enhanced
mode
board which can be added by
DR operation
SPARC64 VII