Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual page 200
Xscf control package (xcp) 109x
Hide thumbs
Also See for SPARC ENTERPRISE M3000:
- Xscf reference manual (542 pages) ,
- Service manual (202 pages) ,
- Product notes (144 pages)
Table of Contents
Advertisement
setdate(8)
EXAMPLES
176
SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised February 2010
The ntpdate(1M) command is executed in the domain.
■
Rebooting the domain
■
The setdate(8) command can be executed only while all domains are powered
■
off.
When an NTP server has been set to XSCF, the setdate(8) command results in
■
an error. Whether an NTP server set to XSCF or not can be checked by using the
showntp(8) command.
To check the currently set XSCF date and time, execute the showdate(8)
■
command.
Sets "January 27 16:59:00 2006" of the local time (JST) as the current time.
EXAMPLE 1
setdate -s 012716592006.00
XSCF>
Fri Jan 27 16:59:00 JST 2006
The XSCF will be reset. Continue? [y|n] :
Fri Jan 27 07:59:00 UTC 2006
XSCF>
The reset continues after this point.
Sets "January 27 07:59:00 2006" of UTC as the current time.
EXAMPLE 2
setdate -u -s 012707592006.00
XSCF>
Fri Jan 27 07:59:00 UTC 2006
The XSCF will be reset. Continue? [y|n] :
Fri Jan 27 07:59:00 UTC 2006
XSCF>
The reset continues after this point.
Sets "January 27 16:59:00 2006" of the local time (JST) as the current time. Au-
EXAMPLE 3
tomatically replies with
setdate -y -s 012716592006.00
XSCF>
Fri Jan 27 16:59:00 JST 2006
The XSCF will be reset. Continue? [y|n] :y
Fri Jan 27 07:59:00 UTC 2006
XSCF>
The reset continues after this point.
y
y
"
"
to the prompt.
y
Advertisement
Table of Contents
