Document Prints From Wrong Tray; Document Fails To Print; Printer Makes Unusual Noises - Xerox ColorQube 8900 User Manual

Document Prints From Wrong Tray

Probable Causes
Application and print driver have conflicting
tray selections.

Document Fails to Print

Probable Causes
Selected tray has wrong paper size loaded.
The way the printer was installed on the
network could be an issue.
Application and print driver have conflicting
tray selections.

Printer Makes Unusual Noises

Probable Causes
One of the paper trays is not
installed correctly.
Tray 1 roller is out of position.
Solutions
1. Check the tray selected in the print driver.
2. Go to the page setup or printer settings of the application from
which you are printing.
3. Set the paper source to match the tray selected in the print driver
or set the paper source to Automatically Select.
Note: Set the paper source tray selection to Automatic to have the
print driver select the tray.
Solutions
To view the Job Status for a failed print on the touch screen:
1. Press the Job Status button, then touch the Active Jobs tab.
2. Find the failed print job in the list.
3. Note the status of the failed print job, such as Held: Resources
Required.
4. Touch to select the print job for more details, then touch
Job Details.
5. Note the Tray number listed under Resources and the Status of
the selected tray.
6. Load the proper size paper in the tray or select another tray.
 Determine if a print spooler or a computer sharing the printer is
buffering all print jobs and then spooling them to the printer.
Spooling can slow print speeds.
 To test the printer, print some information pages such as the
Office Demo Page. If the page prints, you could have a network
or printer installation issue. For additional help, contact the
system administrator.
For details, see

Document Prints from Wrong Tray

Solutions
Open and close the paper tray from which you are printing.
To reset the roller position, open and close the top left side door.
ColorQube 8700/8900 Color Multifunction Printer
Troubleshooting
on page 193.
193
User Guide