Modifying General Settings; Setting Energy Saver Mode - Xerox ColorQube 8900 User Manual

Modifying General Settings

You can modify printer settings such as the language, date and time, units of measurement, display
brightness, and startup page from the control panel.
At the printer control panel, press the Machine Status button, then touch the Tools tab.
1.
2. Touch Device Settings > General, then touch the setting you want to change:

Manual Wake-up Setting allows you to turn the Wake-up Sensor on or off. It also allows you to
set the sensitivity to wake the printer. When the sensitivity is high, you can wake the printer by
pressing any button or touching the screen. When the sensitivity is low, you can wake the printer
only by pressing Power Saver.

Energy Saver specifies when the printer goes into energy-saving mode.

Date/Time allows you to set the time zone, date, time, and display format.
Note: The date and time are set automatically through Network Time Protocol (NTP). To modify
these settings, go to the Properties tab in CentreWare Internet Services and change the Date and
Time Setup to Manual (NTP Disabled).

Language/Keyboard allows you to set the language and keyboard layout.

Custom Keyboard Button allows you to assign text to the custom key on the virtual keyboard.
3. Change settings as needed, then touch Save.
To return to the main screen, touch Home.
4.

Setting Energy Saver Mode

You can set the time the printer spends idle in ready mode before the printer transitions to a lower
power level.
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Device Settings > General > Energy Saver.
3. Touch an option:

Intelligent Ready causes the printer to wake and sleep based on previous usage patterns.

Job Activated causes the printer to wake when it detects activity.

Scheduled causes the printer to wake and sleep according to a schedule you specify.
If you selected Intelligent Ready or Job Activated, under Fast Resume, touch On to reduce the wake
time. This option changes the default sleep and low-power timeout periods, and increases
energy usage.
If you selected Scheduled as the Energy Saver Mode, to select the times at which you want the
printer to wake or sleep, touch Scheduled Settings.
a. Touch a day of the week in the list.
b. To wake on activity, under Schedule Based On, touch Activity.
ColorQube 8700/8900 Color Multifunction Printer
Installation and Setup
35
User Guide