Printer Does Not Turn On - Xerox ColorQube 8900 User Manual

Color multifunction printer
Hide thumbs Also See for ColorQube 8900:
Table of Contents

Advertisement

To restart the printer using the power switch:
1.
Close the printer doors.
2.
Turn off the printer using the power switch on the back of the printer.
3.
On the touch screen, touch Standard Power Off.
Wait 30 seconds after the printer turns off before proceeding to the next step.
If the printer does not turn off after two minutes, it is not able to complete a standard power off
sequence. Disconnect the power cord, wait 30 seconds, and reconnect it.
4.
Turn on the power switch.
If restarting the printer does not resolve the problem, see the table in this chapter that best describes
the problem.

Printer Does Not Turn On

Probable Causes
The power switch is not turned on.
The power cord is not correctly plugged into
the outlet.
Something is wrong with the outlet connected
to the printer.
The printer is connected to an outlet with a
voltage or frequency that does not match the
printer specifications.
Solutions
Turn on the switch.
Turn off the printer power switch, and plug the power cord securely
into the outlet.
 Plug another electrical appliance into the outlet and see if it
operates properly.
 Try a different outlet.
Use a power source with the specifications listed in the
Specifications
on page 235.
ColorQube 8700/8900 Color Multifunction Printer
Troubleshooting
Electrical
191
User Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Colorqube 8700

Table of Contents