Maintenance Mode - Xerox DocuPrint C621 User Manual

3.3 List of Items on the Menu Screen
3
3.3.2
Init NVM (NV Memory Initialisation)
Adjust Voltage
68
• Store Job Log (Default: No)
The printer will start storing information regarding each print job starting from the time
when Yes is selected. However, when the record of print jobs reached 50, the earliest
print job information will be deleted.
When No is selected, information regarding the print jobs will not be stored.
If there is a set of past printing job log stored in the printer, when you
change the setting to No, this set of printing history will remain and you
can print them using the Print Job Log command. However, if you
change the setting from No to Yes, this set of records will be cleared.

Maintenance Mode

This menu enables you to initialise the NV memory in the printer and adjust the copy
voltage according to the type of paper used.
NV memory refers to non-volatile memory that stores printer settings even when the
power is cut off.
• Yes
Initialises the NV memory. When the NV memory is initialised, all menu settings on the
control panel will be reset to their initial values.
In order for the selected settings to take effect, you must restart the
printer. After the setting, you have to switch off the printer and then
switch it on again.
• No
Return to the menu without initialising the NV memory.
Adjust the copy voltage for each of the following settings. The ten levels are: -2, -1, 0, 1,
2, 3, 4, 5, 6 and 7.
• Plain paper
• Transparency
• Heavy weight
• Label
• Coated paper
• Envelope
• Postcard
(Default: 0)
(Default: 0)
(Default: 0)
(Default: 0)
(Default: 0)
(Default: 0)
(Default: 0)