Table of Contents
Advertisement
2.4
When you are printing on postcards or envelopes, make sure that you have placed them
correctly on the tray. Otherwise, they will be printed on the wrong side or in the wrong
direction.
Also, if you are printing on special paper, you have to specify the type of paper and image
quality in the printer driver when you send a print command from the application software.
2.4.1
Printing on Transparencies
Transparencies must be fed from the manual tray.
You can use the Fuji Xerox transparencies (XEROX Film (no border)) for printing in
colour using DocuPrint C621.
46
Printing On Special Media
If you are printing on special paper frequently, you are recommended to
register the settings in the printer driver's User Settings tab. Once you
have register the settings, you do not have to go through the trouble of
specifying the settings each time you print. Refer to the Online Help on
User Settings tab.
Do not use transparencies for full colour jobs (that is, Fuji Xerox
transparency with a white border).
If you use unsuitable transparency, machine fault may occur.
FUJI XEROX full colour transparencies
cannot be used on DocuPrint C621.
If transparencies are allowed to accumulate in the output tray, static
electricity may result and cause a paper jam. Make sure you remove
every sheet of transparency once it is output.
Advertisement
Table of Contents
