Table of Contents
Advertisement
4.5
Description
Paper is not fed
Paper jam
Several sheets are fed at
the same time
Paper slants when fed
Paper Transport Problems
Possible Cause
Is the paper loaded properly?
Is special paper loaded properly
on the manual tray?
Is the paper damp?
Is the recommended paper type
used?
Have all packing materials and
seals been removed?
Is the E spacer removed from the
printer ?
Is the paper tray open?
Is paper jammed?
Is the printer placed on a level
platfrom?
Solution
Load the paper stock properly.
If you are loading special media such
as transparencies, labels, or envelopes,
fan them and make sure that there is
some air buffer between the media.
"2.2 Loading Paper"
Replace with new paper stock.
"2.2 Loading Paper"
Replace with paper of the
recommended size and type.
"2.1 Paper Handling"
Switch off the power switch, and
check the interior of the printer.
1.1 Removing the
Spacers and Packing
Tape in the Setup Guide
Push the paper tray firmly into the
printer.
Clear the paper jam.
The jam may be caused by tape or
adhesive stuck to the rollers. Check the
interior of the printer carefully, and
remove all foreign objects.
"Chapter 5 Paper Jams"
Move the printer to a level platform.
"7.3.3 Environmental
Requirements for
Installing the Printer"
4
93
Advertisement
Table of Contents
