Table of Contents
Advertisement
7.3.3
Environmental Requirements for Installing the Printer
For safe and convenient printer operation, consider the following when installing the
printer.
Install the Printer in a Location that Meets the Following Conditions
• Level and stable
• Well-ventilated
• Ambient temperature range 5 to 32ºC, relative humidity 15 to 85% (no condensation) If
operating the printer with an ambient temperature of 32ºC, the relative humidity should
not exceed 48%. If the relative humidity reaches 85%, the ambient temperature should
not exceed 28ºC.
Connect the Printer to Its Own AC Outlet
If possible, do not plug any other appliances into the printer's AC outlet. If the printer is
connected to the same circuit used by other high power consumption machines, such as
copiers and air conditioners, or machines that generate electrical noise, this may cause
computing errors, resulting in data loss and improper performance.
Avoid Installing the Printer in the Following Locations
• Under direct sunlight
• Near air conditioner or heater
• In a windy place
• On a shaky or vibrating surface
Do not place the printer in a room where there are sudden fluctuations
in temperature, and do not move the printer from a cold place to a
warm humid place. If you do, condensation may occur within the
printer and print quality will deteriorate. If condensation occurs, allow
at least one hour for the printer to adapt to the new environment before
use.
Connect the power plug only to a properly rated power outlet (220-
240 V, 15 A). Never use multi-plug adaptors to plug multiple power
plugs in the same outlet. Be sure to operate the machine on a sole-
use receptacle. Multiple connectors can cause the outlet to
overheat and cause fire.
7.3 Transporting the Printer
7
153
Advertisement
Table of Contents
