Table of Contents
Advertisement
1.1
The names and functions for the various parts of the printer are as follows:
Front View
Name
1. Paper Tray
2. Front Cover
3. Printer Control Panel
4. Face-down Tray
5. Paper Stopper
6. Top Right Cover
7. Manual Tray
8. Manual Feed Unit
9. Right Cover
10. Ethernet Interface
2
Printer Parts and Functions
Load paper for normal printing here.
This is the cover at the front of the printer. Open it to install and replace
toner and drum cartridges.
The control panel consists of the respective LED and buttons, as well
as the display. Refer to "Chapter 3 Control Panel" for details.
Printed documents are delivered to this tray with the printed side facing
down.
Pull out the paper stopper to prevent printed paper from falling off the
printer.
This is the cover at the upper-right side of the printer. Open this cover
when you are installing additional memory or the hard disk.
Use this tray to manual feed media such as postcards and envelopes.
This is a pulled-out unit located on the right side of the printer. Open it to
remove jammed paper.
This is the cover at the lower-right side of the printer. Open it to remove
jammed paper.
This is for the Ethernet cable when the printer is used as a network
printer.
Description
Advertisement
Table of Contents
