Maintenance Mode - Xerox DocuPrint C2535 A User Manual

Item
Substiture Tray

Maintenance Mode

Use this menu to initialize the NVM, configure the plain paper or labels quality adjustment
settings. Also, use this menu to adjust the reference voltage for the transfer roller of each
paper type.
Item
Adjust PaperType
Adjust BTR
Adjust Fuser
Auto Regi Adjust
54
4 Setting on the Control Panel
Specifies whether to print on paper loaded in another tray when there is no paper left in
the tray selected by the auto tray selection feature. This item is displayed when the
optional sheet feeder is installed.
• [Off] (default)
Select this not to replace paper but display a message prompting you to load paper.
• [Larger Size]
Select this to replace the paper with a larger size paper before printing in 100%
magnification ratio.
• [Nearest Size]
Select this to replace the paper with the nearest size paper before printing in 100%
magnification ratio.
• [Bypass Feed]
Select this to print on paper loaded in the bypass tray.
Note
• If a computer issues the instruction about paper selection, it overwrites this setting.
Specifies the paper type of plain paper and labels.
• [Plain] (default: [Heavy])
Selects the density for the plain paper from [Light] and [Heavy].
• [Labels] (default: [Label 2])
Selects the density for the labels from [Label 1] and [Label 2].
Specifies the value of the reference voltage for the transfer roller. You can specify the
value between -20 to 30 for each paper type.
• [Plain] (default: [0])
• [Bond] (default: [0])
• [Transparency] (default: [0])
• [Heavyweight 1] (default: [0])
• [Heavyweight 2] (default: [0])
• [Labels] (default: [0])
• [Coated 1] (default: [0])
• [Coated 2] (default: [0])
• [Coated 3] (default: [0])
• [Envelope] (default: [0])
Specifies the fuser temperature. You can specify the value between -4 to 2 for each
paper type.
• [Plain] (default: [0])
• [Bond] (default: [0])
• [Transparency] (default: [0])
• [Heavyweight 1] (default: [0])
• [Heavyweight 2] (default: [0])
• [Labels] (default: [0])
• [Coated 1] (default: [0])
• [Coated 2] (default: [0])
• [Coated 3] (default: [0])
• [Envelope] (default: [0])
Adjust the color registration automatically. Selecting [On] adjusts the color registration
automatically. The default is [On].
Description
Description