Table of Contents
Advertisement
• SNAP
Use the frame type for IEEE802.3/802.2/SNAP specification.
• 802.2
Use the frame type for IEEE802.3/802.2 specification.
• 802.3
Use the frame type for IEEE802.3 specification.
Protocol
For the following items, set as Enabled or Disabled to use or not use the protocol.
• lpd (Default: Enabled)
To use lpd (lpr) in TCP/IP environment to print, select Enabled. Otherwise, set as
Disabled.
• NetWare (Default: Enabled)
To print in NetWare environment, select Enabled. Otherwise, set as Disabled.
• EtherTalk (Default: Enabled)
To print in AppleTalk (EtherTalk) environment, select Enabled. Otherwise, set as
Disabled.
• SMB TCP/IP (Default: Enabled)
To print in SMB (Windows Network) environment that uses TCP/IP as the transport
protocol, select Enabled. Otherwise, set as Disabled.
To print in SMB (Windows Network) environment that uses NetBEUI as the transport
protocol, select Enabled. Otherwise, set as Disabled.
• SNMP UDP/IP (Default: Enabled)
If you are using SNMP agent features in TCP/IP environment, select Enabled.
Otherwise, set as Disabled.
• SNMP IPX (Default: Enabled)
If you are using SNMP agent features in NetWare environment, select Enabled.
Otherwise, set as Disabled.
• Internet Services (Default: Enabled)
If you are using CentreWare Internet Services, select Enabled. Otherwise, set as
Disabled.
3.3 List of Items on the Menu Screen
3
73
Advertisement
Table of Contents
