4.3
4.3.1
LED is Lit, Blinking or Off
Description
Error LED is on
Error LED is blinking
Online LED is off
Data LED is not blinking
or lit after print command
is sent
Printing Problems
Possible Cause
Is an error message shown on the
printer control panel display?
An error that the user is unable to
resolve has occurred.
Is the printer in the offline mode?
Is the parallel or Ethernet cable
loose or unplugged?
Solution
Refer to the error message and resolve
accordingly.
"4.7 When an Error
Message Appears"
Write down the displayed error
message or error code. Switch off the
power of the machine, unplug the
power plug and contact your Xerox
Customer Support Centre.
Press the Online button on the printer
control panel to switch to the online
mode.
"3.1.3 Buttons"
Switch off the power of the machine,
unplug the parallel and Ethernet cables,
and re-connect them again properly.
Chapter 2 Connecting
the Interface Cables in
the Setup Guide
4
79