Forced Output Of Data Still In The Printer; When Printing Stopped Halfway - Xerox DocuPrint C621 User Manual

1.6
When a page at the end of a processing data is terminated halfway, the next data will have
to wait until job timeout occurred before it can be printed. The display panel will show the
message "Please wait...".
You can push forward the next job by forcing the data still remaining in the printer to be
printed, without waiting for the job timeout to occur.
This section describes the procedure to forcibly output the remaining data.
The procedure is as follows:
Press Online.
Press Set/Eject. The remaining data will be printed.
Once the printing is done, the Print screen is displayed.
16
Forced Output of Data Still in
the Printer

When Printing Stopped Halfway

The factory setting for job timeout is 30 seconds.You can specify the
setting from 5 to 300 seconds. For job timeout details, refer to "3.3 List of
Items on the Menu Screen".
"3.2 Basic Operations of the Menu Screen" on how to use the control
panel
(Printer is processing data)
(The printer is offline)
(Print screen (when the printer is ready to print again))
This message appears when the printer is
processing the data that is currently being
printed. The processing time differs according to
the size of the data printed. Please wait until the
message changes.