Table of Contents
Advertisement
3.3.5
Network
This menu allows you to specify network-related settings.
Ethernet Settings
Specify the Ethernet communications speed and mode.
• Auto (Default)
Switch automatically to 10Base/Half, 10Base/Full, 100Base/Half or 100Base/Full.
• 100Base/Full
• 100Base/Half
• 10Base/Full
• 10Base/Half
TCP/IP
Specify the essential settings for using the TCP/IP protocol. The following items are
available in this menu.
• IP Address Setup
Specify the methods to obtain IP address. The possible values are as follows:
"DHCP" (Default)
Obtains the IP address from the DHCP server on the network.
"Panel"
Specify the IP address on the control panel.
• You cannot change the settings on this menu if you entered the Menu
screen when the printer is printing.
• In order for the selected settings to take effect, you must restart the
printer. After the setting, you have to switch off the printer and then
switch it on again.
3.3 List of Items on the Menu Screen
3
71
Advertisement
Table of Contents
