Table of Contents
Advertisement
7.3.2
Transporting the Printer
You will need A, B, C, D, E and F spacers, which were removed during installation, to
prepare the printer for transportation. After you have the spacers ready, follow the
procedure below.
• When transporting the printer, do not reinstall toner cartridges that
were removed beforehand. The toner may spill and damage the inside
the printer.
• When the optional 2-tray module or special cabinet is installed, remove
them from the printer before moving the printer. If the printer is not
properly secured to the tray module, it may fall or tip over, and may be
damaged or cause injury. For removal and installation of the optional
accessories, refer to their respective manual. In addition, these
optional accessories are heavy items, we recommend that you use a
transportation company to transport them.
7.3 Transporting the Printer
Press the " " side of the power switch, located
on the left side of the printer, to switch off the
printer.
Remove the power cord and all other cables,
such as the parallel cable.
Never touch a power cord
with wet hands. Danger of
electric shock exists.
When unplugging the
machine, grasp the plug
instead of the cord.
Forcibly pulling on a cord
can damage it and cause
fire or electric shocks.
7
149
Advertisement
Table of Contents
