Table of Contents
Advertisement
2.2.2
Loading Paper on the Manual Tray
The procedure for loading paper on the manual tray is as follows.
To avoid paper jams, do not load different sizes of paper on the tray at
the same time, and do not add paper to the tray before it empties.
• "2.4 Printing on Special Media" when loading postcards,
transparencies and glossy paper onto the manual tray.
• "2.5 Printing on Side Two of Printed Sheets" to print on side two
(back) of pre-printed paper.
Open the tray if it is folded.
To avoid damage, do not pull
hard on the tray or place heavy
objects on top of the tray.
Lift the guide in the A3 oversize tray if you are
using a paper size other than 328 x 453 mm.
This guide should only be folded down when
using A3 oversize paper (328 x 453 mm), or when
custom size exceeds 12.2 inch in width.
If you attempt to print with the
guide folded down (when
printing on paper with width less
than 12.2 inch), the image
position may slip on the printed
page.
2.2 Loading Pape
41
2
Advertisement
Table of Contents
