Maintenance Mode Menu - Xerox Phaser 6500 User Manual

Item
Odd Page 2-Sided
(Phaser 6500DN printer
configuration only)
Power On Wizard

Maintenance Mode Menu

Use this menu to configure color registration and to reset defaults.
Item
F/W Version
Auto Regi Adj.
Adjust Color Regi.
Clear Developer
Toner Refresh
IU Refresh (Imaging Unit
Refresh)
Init Print Meter
Initialize NVM
Downloaded From ManualsPrinter.com Manuals
Description
If the optional duplex unit is installed, this item tells the printer how to
handle the last odd page in a 2-sided print job.
• 1-sided
• 2-sided
Resets the Power On Wizard. The first time the printer is turned on, a special
menu appears on the printer control panel. Use it to configure initial
settings such as language, default paper size, and network settings. This
setting enables the administrator to reset the Power On Wizard so that the
special menu appears when the printer is turned on.
Description
Displays the current firmware version installed in the printer.
Auto Registration Adjust. When On (the default), the color registration is
adjusted automatically.
Adjust Color Registration. Used to correct the color registration between
colors. For details, see Color Registration
• Auto Adjust: Use to force an automatic color registration correction.
• Color Regi Chart: Prints the color registration chart used to check for
correct color registration.
• Enter Number: Use to select and correct color registration numbers.
• Fast Scan (1): For setting horizontal color registration, or Slow Scan (2)
for setting vertical color registration.
Resolves print-quality defects associated with charge problems after
high-coverage print jobs.
Resolves print-quality defects associated with charge problems after
low-coverage jobs.
Helps improve imaging unit operation by performing a density and color
curve calibration.
Initialize Print Meter. Resets the Print Meter.
Resets the settings in the nonvolatile memory (NVM), except for the
network settings, to their defaults. NVM is memory that stores the printer
settings even after the power is turned off. After selecting this option and
restarting the printer, all the menu settings are reset to their default values.
Note:
• You cannot execute the Initialize NVM setting during printing.
• After changing this setting, turn off the printer and then turn it on
again to activate the change.
Control Panel Menus
on page 136.
Phaser 6500 Color Laser Printer
User Guide
97