Table of Contents
Advertisement
6.2 Replacing the Drum Cartridge
140
Align the " " mark on the cartridge by turning
lever A in the direction of the arrow until it
points to the "lock" position ( ).
Close the front cover.
You cannot close the front cover
if levers A and B are not returned
to their proper positions. When
this happens, check the position
of the two levers.
After replacement, place the used drum
cartridge into the empty aluminium bag and
then into the packaging box.
Attach the seal bundled with the drum cartridge
on the packaging box and mail it out.
Never throw used toner
cartridges into an open
flame. It can cause an
explosion and you can
get burnt.
Advertisement
Table of Contents
